To set up the iTrack Solo device to record into Auria on iPad follow these steps:

1. Ensure the iTrack device is properly connected and showing 'USB'

2. Select the wave symbol top left of the screen to open the arrange window.

3. Select 'Add Track' from the menu, and add TWO mono tracks, as the microphone will be detected on channel 1 and the jack input on channel 2. NB. It is not possible to specify which input you wish to capture in the track settings

4. Record enable the track

5. Press the red RECORD button top right of screen, followed by the PLAY button to capture your audio, then STOP when finished