Focusrite Control for iOS relies on a stable WiFi connection in order to communicate between your iDevice and your computer. If your interface isn't showing up when you try to use the app, or you're experiencing frequent disconnections, you may wish to check the following troubleshooting steps:

- Do you have the latest version of RedNet Control installed on your computer? You can obtain the latest version from the Downloads page for your interface here.

- Do you have the latest version of the Focusrite iOS Control app? If not, please install this from the App Store application on your iDevice.

- Have you ensured that both the computer running the RedNet Control desktop app and the iDevice you're using are connected to the same WiFi network? If they are already and you're experiencing disconnections, is your router quite far away from the computer/iDevice? The further away from the wireless router, the weaker the signal.

- If both devices are already connected to the same WiFi network, are they on the same subnet? When using almost all 'home' routers this will be done automatically and should only be an issue if you have a more complex network set up.

- Do you have any Firewall/Anti-Virus software running that could potentially be blocking the connection? The best way to check this is to temporarily disable any such software and check if this fixes the issue. If it does, you can then add RedNet Control as an exception (steps below). Please note that 3rd party Firewall/Anti-Virus software may not have the same layout as below if in doubt consult the software manufacturer.

Configure Mac Firewall

- Open System Preferences

- Go to 'Security and Privacy' and navigate to the 'Firewall' tab

- Click 'Firewall options' (Note: if this is greyed out, click the Lock symbol in the bottom left corner and enter your computer password first)

- Locate 'RedNet Control' and 'RedNet Control Server' in the list, then set these to 'Allow incoming connections'

- Press OK