Applies to Clarett Thunderbolt
For Scarlett 3rd and 4th Gen, ISA C8X, Clarett+ and Clarett USB, see the following article:
Using your Scarlett's Loopback for video calling and streaming
The following article applies to interfaces that feature Loopback. To check if your interface supports loopback, see this article.
Which Focusrite interfaces feature Loopback?
This guide shows you how to use your audio interface's Loopback feature to add multiple channels to a custom mix and create a mix minus, and send this to your application. This is useful for streaming and video calling.
Steps
Open Focusrite Control and reset your interface by going to File > Restore Factory Defaults.
Under Output Routing, select Loopback.
- Add any further inputs to the Custom Mix using the + icon.
- Adjust the mix levels from within Focusrite Control.
Selecting this input in your software
Windows
In this example we'll be using OBS. If using an application with ASIO, all inputs are already available, and steps 1-3 can be skipped.
If using a WDM application, the Loopback input needs to be 'exposed' as a separate audio device. To do this:
- Right click the Focusrite Notifier icon in the Windows system tray.
- Select Expose/hide Windows channels.
-
Tick Loopback L + R.
The Loopback channel now appears as a separate input.
- Open OBS Studio.
- Select the + button under Sources.
- Select Audio Input Capture > + Add a new Audio Input Capture.
- Select Focusrite USB Audio (Loopback L + R).
Your Loopback mix now appears within OBS.
Levels for your stream or video call can be controlled from the Output Routing section within Focusrite Control.
macOS
In this example, we are using OBS on macOS.
Some applications on macOS only allow you to select input 1 as an audio input. In this instance, it isn't possible to select the Loopback mix in your streaming/calling software
- Open OBS Studio.
- Select the + button under Sources.
- Select Audio Input Capture > + Add a new Audio Input Capture.
- Select the device you're using, for example Scarlett 18i20 4th Gen.
- Untick Enable Downmixing.
- Select Loop 1 and Loop 2 under Channel 1 and Channel 2 in OBS.
Your Loopback mix now appears within OBS.
You can control levels for your stream or video call from the Output Routing section within Focusrite Control.
If this article hasn't helped you, please feel free to search again at the top of this page or, to contact support, please click here.