Applies to: all audio interfaces
Many new users become confused when they start recording and find that their Vocal or another signal from one microphone is placed only on the left in their headphones or speakers.
The common question is "How do I get my mic to record in stereo?"
The issue is actually that you are recording a mono input into a stereo track, as you have only one microphone.
A Stereo input or track places Input 1 on the left and Input 2 on the right. This is used for situations where you might have two mics in a stereo pattern, such as Room Left and Room Right over your drums or another instrument.
A Mono input will place the single microphone correctly in the centre of the track. This would be used in situations like recording vocals or a guitar.
Audio Tracks in your DAW have an Input and an Output. By default, the output in the DAW will be stereo. Inputs can be either Stereo or Mono.
Always use Mono to record one mic.
Use Stereo tracks to recorded two mics on the same source.
Some DAWs may have one type of track with a stereo or mono input selection. Other DAWs may ask you to pick a stereo track or mono track specifically.
You may have a Vocal Mic in Input 1 and Guitar in Input 2. Make two different tracks. Set one track to Mono 1 and the other track to Mono 2. This will correctly play both vocals and guitar in the centre and offer pan knobs for each.
Here are some examples in a few DAWs:
Ableton Live Lite:
Pro Tools/Pro Tools | First: Ensure that you have first created a Mono Track (Track > New)
If you want to use two microphones in a stereo configuration please see this article for a variety of Stereo Micing Techniques.