Release date: 13th Aug 2026

What’s New

Auto Gain count-in

Available for Scarlett 4th Gen (excl. Solo) and ISA C8X interfaces

• Set a count-in time before the Auto Gain process starts to give performers more time to prepare and deliver a representative performance

View persistence

• The app will now remember the last view you were on when restarted
   

Bug fixes

The following bugs have been fixed:

• Focusrite Notifier was not launching Focusrite Control 2 from the taskbar when some supported devices were connected (Windows only)
• Some Playback channels were not passing audio (Scarlett 18i20 2nd Gen only)
• 48V buttons were incorrectly shown on some channels (Scarlett 8i6 3rd Gen only)

Includes driver version 4.150.0.432

Release date: 16th July 2026

What’s New

In public beta: more devices supported in Focusrite Control 2

The below products now have beta support in Focusrite Control 2, bringing a more accessible and intuitive setup experience. Learn more here

• Scarlett 3rd Gen range
• Clarett+ range
• Clarett USB range
• Scarlett 2nd Gen 6i6, 18i8, and 18i20
   

Firmware update available for selected Scarlett 4th Gen devices

A firmware update to version 3.0.2778 is now available for the 16i16, 18i16, and 18i20, bringing the following improvements:

• Front panel gain control: Gain can now be adjusted in precise 1 dB increments using the front panel controls
• ADAT Expansion Mode: A new ADAT Expansion Mode simplifies setup when using your device to expand another interface. All analogue channels are automatically routed to ADAT for faster configuration.
• Mix bus level control: You can now adjust the overall level of your monitoring mix using the Mix bus level fader
• Improved macOS latency compensation: Latency compensation is now more accurate within certain DAWs on macOS

Bug fixes

The following bugs have been fixed:

• 48V setting retention (16i16 and 18i16 only): Devices now correctly remember 48V settings after restart when “Remember 48V settings” is enabled
• Standalone clocking fix: Devices now correctly maintain the selected sample rate when operating in standalone mode
• Application stability improvements: Resolved an issue that could cause Focusrite Control 2 to hang in certain situations

Release date: 27th May 2026

What’s New

• This update introduces some small bug fixes and improvements for ISA C8X (includes firmware version 3.0.2761.0)

Release date: 28th April 2026

What’s New

• This update introduces support for the new ISA C8X. ISA C8X combines the trademark ISA sound with comprehensive remote control and all the analogue and digital I/O, routing, and recallability you need to run your entire studio. Learn more.
• We’ve added a new Metering view for selected products, allowing you to check the levels of your device’s inputs and outputs at a glance
• You can now adjust the level of the internal Talkback mic on 18i20 and ISA C8X
• Includes Windows driver 4.144.0_362

Bug Fixes

• Fixed an issue that could cause a crash in the MIDI driver

Release date: 26th March 2026

What’s New

• Automatic Clip Indicator Reset
  You can now set a custom time interval for clip indicators to reset automatically in the Preferences.

• Full Screen App Window
  The application window can now be fully maximised for additional flexibility.

• Custom Mix Naming (4i4, 16i16, 18i16, 18i20 only)
  You can now rename your mixes in the same way as other channels. Custom channels and mix names will now appear within the routing drop down menus to help speed up your workflow.

Bug Fixes

• Clock Sync Status
  Resolved an issue where the app would occasionally display an incorrect clock sync status.

• macOS Tahoe Window Focus Issue (macOS only)
  Fixed a bug where the app window could remain focused even after clicking outside the application.

Release date: 5th Feb 2026

What's new

• We fixed an issue affecting a small number of customers whereby Focusrite Control 2 wouldn’t detect the connected device

Release date: 27th Jan 2026

What's new

• Transferring Focusrite Control 2 Presets to another computer is now possible with the new export and import feature

• Clear all peak levels at once by holding Alt/Option and clicking on the peak indicator

• We fixed an issue which caused navigation of the Routing page to become stuck when using screenreader software

• Other minor bug fixes

Release date: 11th Dec 2025

What's new

[Solo, 2i2, 4i4 only]

• You can now adjust the LED brightness on your interface from the Preferences in Focusrite Control 2
• The LEDs on your interface will now automatically turn off after 10 minutes of inactivity, and they will turn on again if audio is detected, or the front panel is interacted with. You can change this behaviour from the Preferences in FC2.
• Includes a firmware update for Solo, 2i2 and 4i4 to 2.0.2417.0

Release date: 3rd Nov 2025

What’s new

• Improved the performance and power efficiency of FC2, allowing it to run smoother and use less battery.
• Improved translations throughout the app.
• Fixed an issue on Windows where the app window would not come to the foreground following device disconnection.

Release date: 22nd Sept 2025

What’s new

• You can now hide Mixer channels from the Channels dialog to keep focus on the channels you're using
• [Windows only] We've made some changes to the installation process to improve connecting to the FC2 mobile app

Release date: 9th Sept 2025

What’s new

• You can now see the clock sync status and change sample rates from the navigation bar
• [macOS only] If you have more than one Scarlett 4th Gen interface connected to your Mac, you can now select which one FC2 controls. This makes it easier to set up multiple interfaces connected via ADAT or S/PDIF.

Release date: 27th Aug 2025

What’s new

• Added an option for Pre-fade Mixer metering; you can now choose whether the metering in the Mixer channels is affected by the position of the fader, from within the Application section of Preferences
• Includes driver version 4.143.0.261 which fixes an issue whereby the DAW could freeze when changing sample rate
• Fixed a bug whereby the window size and location were not being saved between restarts

Release date: 11th Aug 2025

What’s new

• Includes driver version 4.142.0.253, which adds support for Arm64-based Windows computers
• Includes a firmware update for the 2i2 to 2.0.2408

Release date: 31st July 2025

What’s new

• Increased the number of Inputs that can be seen at one time in the Inputs view
• Improved screen reader navigation over channel strip controls

Release date: 21st July 2025

What’s new

• Minor bug fixes

Release date: 14th July 2025

What’s new

• You can now rename the inputs in Focusrite Control 2 for desktop

Release date: 3rd July 2025

What’s new

[4i4, 16i16, 18i16, and 18i20]

 

• We’ve added more flexibility to the mixer to allow you to choose between controlling mono and stereo channels

Note: If you’re using Focusrite Control 2 for Mobile (iOS/Android), please make sure the app is up to date to ensure changes made in the desktop app are reflected correctly

• Includes a firmware update for 16i16, 18i16 and 18i20 to 2.0.2464.0

Bug fixes

• Fixed an issue with preamp linking not being reflected correctly

Release date: 4th June 2025

What’s new

• This update allows you to use the new Monitoring section of Focusrite Control 2 on iOS and Android. You can control volume, mute, and dim for your speakers, and switch between Main and Alt Monitor groups. 18i20 users can also control the volume of the Headphone outputs.

Release date: 6th May 2025

What’s new

• Bug fixes and optimisations
• Includes a firmware update for 16i16, 18i16 and 18i20 to 2.0.2450.0

Release date: 1st April 2025

What’s new

• [18i20, 18i16, 16i16] We've made it possible to add individual mono outputs to monitor groups, allowing for more flexibility when configuring multi-speaker and surround setups
• [18i20, 18i16, 16i16] You can now choose to retain 48V settings between restarts, from the Preferences menu
• We've fixed some bugs with the main output meters
• We've made some improvements to our Windows installers, which should help resolve startup-crashes on some systems

Release date: 13th March 2025

What's new

• [18i20 only] You can now expand your channel count even further with support for up to 16 ADAT inputs and outputs at 44.1 and 48 kHz

Release date: 13th February 2025

What's new

[4i4 only]

• You can now directly route audio to outputs in the Routing view

[16i16, 18i16 and 18i20 only]

• We've revamped the speaker switching feature to allow more flexibility with Monitor groups
• Customise which outputs are controlled by the main Output dial by adding them to a Monitor group. See more here.
• Set the level of individual outputs without routing via a Mix

Release date: 16th January 2025

Bug fixes

• [18i20 only] Fixed an issue with ADAT input 7-8 availability in Dual ADAT mode

Release date: 23rd December 2024

Bug fixes

• Fixed a crash on startup which could occur on some Windows systems

Release date: 18th December 2024

Bug fixes

• [18i20 only] Fixed an issue whereby ADAT input channels 7 & 8 were routed incorrectly when changing to Dual ADAT mode

Release date: 16th December 2024

What's new

• You can now configure the digital ports on the 16i16, 18i16, and 18i20 to suit your needs. For more information see here.

Bug fixes

• Improved firmware update reliability
• Added some missing translations
• Fixed screenreader focus when scrolling

Release date: 19th November 2024

What's new

• We fixed our software update process

Release date: 15th November 2024

What's new

• Includes a firmware update for 16i16 and 18i16 to 2.0.2399

Release date: 21st October 2024

What's new

• We've improved the multi-channel Auto Gain experience for the 18i20 in Focusrite Control 2, allowing you to select the channels you wish to apply Auto Gain to
• Includes a firmware update for 18i20 to 2.0.2399.0

Release date: 11th October 2024

What's new

• You can now Auto Gain multiple channels simultaneously from Focusrite Control 2 on 16i16, 18i16, and 18i20

Release date: 7th October 2024

What's new

• We've added support for three new Scarlett 4th Gen interfaces to Focusrite Control 2; the 16i16, 18i16, and 18i20. Discover more here.
• You can now pair Focusrite Control 2 for desktop with our new iOS and Android app*, allowing you to remotely control your Scarlett from wherever you are in your recording space. Find out more here.
• Updated Windows driver version to 4.124.3

*Android support coming soon

Release date: 12th June 2024

What's new

• You can now effortlessly save and recall your Scarlett's settings with Presets. Any Presets you save include all your Input, Mixer, and Routing settings.

Release date: 15th May 2024

What's new

• We've added links to your bundled software and the Help Centre from the app menu

Bug fixes

• We've improved the reliability of the initial out of the box firmware update
• [Solo only] We fixed an issue where clicking the Air button in the app was not enabling Air on the Scarlett Solo

Release date: 1st May 2024

Bug fixes

• We fixed an issue with some Scarlett interfaces not outputting audio after updating from older firmware

Release date: 25th April 2024

What's new

• We've added the ability to reset your Scarlett to the default settings

Release date: 28th March 2024

Bug fixes

• We fixed an issue where Focusrite Control 2 could crash when opening if the sample rate is above 96kHz
• We fixed some translation issues

Release date: 19th March 2024

Bug fixes

• We fixed an issue whereby the firmware update for Solo in the last release (v.1.175.0) was not working properly
• We fixed an issue whereby some text was being cut off in some languages within certain areas of the app

Release date: 7th March 2024

What's new

• Includes a firmware update for Solo which increases the input level when using the "Combine Input 1 and Input 2" feature (version 2188)
• Settings are now retained after a firmware update
• We added a progress bar to show the progress of firmware updates
• General performance improvements

Release date: 14th February 2024

What's new

• Focusrite Control 2 will now remember the last window position it was set to when re-opening
• You can now resize the Focusrite Control 2 window when a 4i4 is connected
• Includes a firmware update with minor bug fixes for 4i4, to version 2108

Release date: 23rd January 2024

What's new

• We've added readouts to the gain controls, mixer faders, and pan controls so you can see the exact value being set
• We've improved the look and feel of the title bar

Bug fixes

• [2i2 only] We've fixed an issue where the Direct Monitor state in Focusrite Control 2 could go out of sync with the hardware

Release date: 20th December 2023

What's new

• Updated bundled Windows audio driver to v4.119.13 (see release notes here)

Release date: 14th December 2023

What's new

• We've added a splash screen when you open Focusrite Control 2 to improve the look and feel of the app

Release date: 29th November 2023

What's new

• [2i2 only] Optimise your live stream with more control of Loopback; you can customise the levels of the analogue inputs and computer audio in the Direct tab in Focusrite Control 2. An option in the Preferences allows you to send that mix to Loopback to use as an input source in other apps. On 2i2, your current direct mode is also reflected in the loopback mix allowing you to correctly pan stereo sources.
• We’ve broadened the range of text in Focusrite Control 2 which is translated to improve the experience for non English speakers
• We’ve improved the ordering of controls in the mixer channel strip for screen readers

Bug fixes

• We’ve fixed an issue which meant that checkbox controls weren’t reading correctly for screen readers

Release date: 16th November 2023

What's new

• [Solo only] To enable you to use your mic in apps which only accept the first input channel, we’ve added a setting which combines both inputs on the Scarlett Solo. Learn more here.
• [Solo only] Optimise your live stream with more control of Loopback; you can customise the levels of the analogue inputs and computer audio in the Direct tab in Focusrite Control 2. An option in the Preferences allows you to send that mix to Loopback to use as an input source in other apps. Support for 2i2 coming soon.

Bug fixes

• We fixed an issue where the levels in the Direct Monitor mix would not be retained if they were above 0dB

Release date: 30th October 2023

What's new

• We’ve made some changes to the channel strips to make better use of the space in the app window

Release date: 18th October 2023

What's new

• [2i2 only] Turn on and control 2i2's Direct Monitor mode from Focusrite Control 2. Within the Direct Monitor view, you can customise the balance between both inputs of your 2i2, and your computer’s Playback audio to get the perfect monitor mix
• Updated bundled Windows audio driver to v4.119.3 (see release notes here)

Bug fixes

• We've fixed an issue which could occur during driver installation where a restart would sometimes be skipped erroneously
• Fixed an issue where devices were not being recognised on startup
• Miscellaneous crash fixes throughout FC2

Release date: 18th October 2023

What’s new

• [2i2 only] Turn on and control 2i2's Direct Monitor mode from Focusrite Control 2. Within the Direct Monitor view, you can customise the balance between both inputs of your 2i2, and your computer’s Playback audio to get the perfect monitor mix

Bug fixes

• We’ve fixed an issue which could occur during driver installation where a restart would sometimes be skipped erroneously.
• Miscellaneous crash fixes throughout FC2

Release date: 12th October 2023

Bug fixes

• We've fixed a crash that could occur on Focusrite Control 2 when interacting with the device
• We've made some improvements to the Windows installer

Release date: 9th October 2023

What's new

• [Solo only] You can now turn on Direct Monitor from Focusrite Control 2 and customise the mix; you can control the levels of both inputs on the Solo and your computer's Playback audio. Similar functionality for 2i2 is coming soon
• When using a macOS computer with a Force Touch trackpad, you’ll get haptic feedback when gain dials and faders are at minimum and maximum and also when the faders are moved to the 0dB position
• Includes a firmware update for Solo and 2i2 - version 2096

Release date: 20th September 2023

What's new

• Focusrite Control 2 is now available in 12 languages; if your system language is set to one of the below languages, the app will be translated from the default (English)
  • Deutsch, Français, Español, Italiano, Nederlands, Svenska, Polski, Português, 简体中文, 日本語, 韓国
• Accessibility improvements; when you press a button on your Scarlett, the screen reader announces the status of that button when Focusrite Control 2 is in focus
• You can now give us feedback directly from the app
• We made some tweaks to the meter labels so they are easier to read
• We've improved some interactions on the front panel
• Includes firmware update for Solo, 2i2 & 4i4 - version 2089

Release date: 31st August 2023

• Focusrite Control 2 is a brand new app for your Scarlett 4th Gen that makes session setup painless, allowing you to focus on what matters - capturing great performances.
• Set up your session without moving from the sweet spot, with remote control of Scarlett's preamps. Control Auto Gain, Clip Safe, and Air without looking away from your screen and keeping your focus on recording.
• Create and customise headphone mixes using Focusrite Control 2's flexible mixer. The ability to directly monitor your inputs via the mixer ensures latency never gets in the way of capturing quality performances.
• Feel confident you have the perfect input level with Focusrite Control 2’s precise metering and peak indicator. Metering is easy to read with accurate values coming straight from your Scarlett.
• With comprehensive screen reader compatibility for creators with impaired vision, Focusrite Control 2 is the most accessible software we’ve made to date