Requirements:

• Computer with Thunderbolt 3 port.
  • Thunderbolt 1 and 2 systems are not supported, but may work.
  • Thunderbolt 4 & Thunderbolt 5 systems are not officially supported and are unlikely to function as accessories built to Thunderbolt and Thunderbolt 2 specifications are not supported by Thunderbolt 4/5 PCs, therefore we cannot recommend them for use with the Clarett range.
• Windows 10/11 64-bit operating system
  • Configured as per our optimisation and troubleshooting steps outlined in this article
• Intel processor*
• Thunderbolt 3 to Thunderbolt 2 adapter**
• The latest version of Focusrite Control (see the Downloads section of our website)

The following systems have been seen to work well with Clarett devices:

*specs kindly provided by an external beta tester, but as full testing has not been conducted, there is the chance it may have issues

**specs kindly provided by some external users ThunderboltEX 4 card firmware needs to be on older firmware, as outlined by ASUS, if the card is running newer FW or the Motherboard has an updated BIOS Thunderbolt 1-2 devices will not work - ASUS Thunderbolt  
On particular systems, we have seen an issue that can sometimes cause short bursts of output-only glitches with the Clarett Thunderbolt range.

Systems that have exhibited playback problems with Claretts:

If your computer has one of the potentially problematic Thunderbolt Controllers listed above and you encounter sporadic output glitching then please Contact Technical Support and we can run a scan to determine whether the issue is caused by the Thunderbolt implementation on your computer or by something else (in which case we can troubleshoot). Please note that the aforementioned “scan” can only be run when a Focusrite Clarett Thunderbolt interface is connected to the computer in question.

Systems that have exhibited crashes whenever Thunderbolt 1 or 2 devices are connected:

If you’re unsure as to what Thunderbolt Controller chipset your machine has, then you can check:

1. Go to Device Manager (right-click the Windows icon and select “Device Manager”)
2. Expand “System Devices”
3. Locate the “Thunderbolt Controller” in this section:

* Initial testing of the performance of our Thunderbolt devices on Windows systems with AMD processors has revealed some potential problems, which we are investigating. It's entirely possible that these problems have nothing to do with our Thunderbolt implementation and therefore cannot be solved by us. This being the case, we currently do not support or recommend AMD-based Thunderbolt systems.

** We’ve seen differing performances between the various Thunderbolt 3 to Thunderbolt 2 adapters on the market depending on what particular computer they’re used in conjunction with. On some systems, an adapter allows for “hot-plugging” (connecting/disconnecting the Focusrite interface while the computer is switched on), on other systems the same adapter does not allow this.

This being the case, we can’t recommend a specific adapter. All we can advise is to try one adapter (e.g. the Apple Thunderbolt 3 to Thunderbolt 2 adapter) and, if that doesn’t support hot-plugging, either remember to avoid hot-plugging entirely or try a different adapter (e.g. the Startech or Cable Matters Thunderbolt 3 to Thunderbolt 2 adapters).