Hardware
Get hardware support for Focusrite products, including repair options, troubleshooting tips, and detailed guides for maintaining and updating your equipment.
- My Scarlett 4th Gen or Vocaster is not recognised or not powering via USB
- I'm getting little or no signal from my line-level equipment
- Red Range & Clarett Thunderbolt not appearing as an audio device on macOS Sequoia & macOS Tahoe
- Sonoma & Sequoia mac Thunderbolt System Extensions
- I'm getting little or no signal from my guitar/instrument-level equipment
- Troubleshooting ADAT
- OctoPre and expansion preamp troubleshooting guide
- Why does my interface click when powering on or changing sample rate?
- Ich erhalte nur ein geringes, oder kein Eingangssignal von meinem Mikrofon
- 'Auto Gain failed - We didn't detect any usable signal'
- I’m getting little or no signal from my microphone or mic-level equipment
- How to Disable USB Restricted Mode on macOS 13+
- Monitoring audio from your computer’s internal audio outputs
- The monitor control has no effect on the output level
- My interface isn't appearing on my Mac
- Troubleshooting USB audio interface issues
- Connecting 3.5mm Microphones to Focusrite Interfaces
- After restarting my interface 48V Phantom Power turns off
- My microphone doesn't work connected to the 1/4" jack input
- Noise at high gain levels
- Why can't I hear my MIDI keyboard?
- My ISA unit is not working - how can I reset it?
- The ‘On’ LED on iTrack One Pre does not light up
- Clarett Thunderbolt Windows | Troubleshooting Guide
- No sound when the monitor dial is low on my interface
- What is the warranty on my Focusrite product?
- Connecting two ADAT Preamps to your interface
- Meter calibration on the ISA Two
- The gain/USB LEDs are constantly flashing on my interface
- Mein TOSLINK-ADAT-Kabel passt nicht in den ADAT-Anschluss