Platinum Range
- Are the Octopre line inputs routed through the mic pre circuitry?
- Can I connect an electric guitar or bass direct into the VoiceMaster?
- Can I connect my Octopre direct to my computer?
- Can I record two signals simultaneously with one ToneFactory?
- Can I stop the Octopre from defaulting to the same digital card settings every time I turn it on?
- Can I use condenser mics and dynamic mics simultaneously with my Octopre LE? Will phantom power damage the dynamic mics?
- Complete List of Fuses used in Focusrite Products
- Does the Octopre auto-sense sample frequency and bit depth?
- Getting rid of clicks and pops when syncing VoiceMaster pro to an external device.
- How does the 'overdrive' circuitry on the ToneFactory work
- I am confused by what the buttons do on my Platinum ADC card (Penta, Trak Master, VoiceMaster Pro, TwinTrak Pro, TrakMaster Pro). What do I need to press in?
- I am not sure where the connectors need to go when fitting the ADAT card in my Octopre LE - the instructions do not make it clear. What is the right way?
- I can hear distortion on channels 2,4,6 and 8 of my Platinum Octopre–how can I get rid of it?
- I can hear hiss on the output of my VoiceMaster Pro. What can I do?
- I can't get any sound from the monitor outputs of my VoiceMaster Pro when using the mic input.
- I can't see the digital output connectors on the back of my new Octopre. What do I need to get?
- I get a loud burst of noise when turning the phantom power on on my VoiceMaster Pro. Is this normal?
- I get a loud pop through my speakers when I turn my VoiceMaster Pro on and off. Is this normal?
- I have connected my Platinum ADC via S/PDIF but hear digital noise on the S/PDIF Receiver.
- I have connected my VoiceMaster Pro via S/PDIF to my sound card but am only receiving signal on the left channel. What is wrong?
- I have to set all the gains on my Octopre LE high to get a good input level in my DAW. Is this right?
- MixMaster expander is causing the signal to cut out.
- My compounder gets very hot. Is this a problem?
- My Penta does not power on. What can I do?
- My VoiceMaster Pro has started making a crackling sound - what can I do?
- Octopre dynamics control - what it does and how to use it.
- Octopre heat and fan noise.
- Octopre power rating.
- Penta Attack & Release Values
- Should I leave my Octopre switched on when not in use?