Applies to: Clarett OctoPre & Clarett+ OctoPre
Each analogue input on the Clarett OctoPre has an unbalanced insert point that you can use to send the signal to external effects and then receive the effected signal back on.
The insert points are 1/4 inch jack TRS connections with the following wiring convention:
Tip = Send
Ring = Return
To turn the insert point on for a channel, press the 'Insert' button next to the metering display, then press the selector button below each channel that you wish to switch the insert point in on (the LED next to it will turn green to indicate that the insert is active).
More information can be found in the product manual which can be downloaded from the Downloads section of the website.
If you need any more information please contact Customer Support.