Media Icons Facebook Twitter Google+ RSS Focusrite TV Focusrite Soundcloud

SaffireControl connection lost message

This applies to the Legacy Saffire Interfaces

If you get the message"Connection to Saffire/Saffire LE/Saffire Pro lost...." please check the firewire cable is seated properly in both Saffire and computer.

Saffire PRO only: Check that the Unit ID is set to the correct Saffire pro and hit the ID button

Try an alternative firewire port if available.

If there are any other firewire devices attached to the computer or Saffire then check for any driver / firmware updates for the said device.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments