What do the 'tight' and 'punch' buttons do to the signal on the TrakMaster?

The 'tight' switch alters the ratio of the compressor from 2.5:1 to 6:1. When engaged the compressor will squash the signal more and give it less of a dynamic range than when switched out. For heavier compression press this button in.

The 'punch' switch alters the attack time of the compressor. When switched out the attack time is fast and the compressor will reduce the gain of a signal almost immediately after the level passes the threshold. When pressed in the attack time is lengthened so that the compressor does not reduce the gain of the signal until after the initial transient, therefore preserving the initial punch of a sound.

War dieser Beitrag hilfreich?
0 von 0 fanden dies hilfreich
Haben Sie Fragen? Anfrage einreichen


Didn't find what you were looking for?

Search again using our search tool.