Connecting ISA 828 AES Outputs 1-8 to Pro Tools HD 192 interfaces at 192kHz

To record all eight channels digitally to Pro ToolsTM HD at 192kHz, all eight AES channels need to be enabled on the ISA 828 (default jumper positions shown here) and 2 Digital cards must be fitted in the HD192 interface. A 25-pin to two 25-pin cable must then be used, with the following pinout:

War dieser Beitrag hilfreich?
0 von 0 fanden dies hilfreich
Haben Sie Fragen? Anfrage einreichen


Didn't find what you were looking for?

Search again using our search tool.