The Mac OS X firmware updater keeps failing. What do I do?

The firmware update has two stages. You will see a progress bar for each stage. Please check the colour of the LINE / INSTR LEDs on the front panel. They should be green before the update. When the firmware update begins, the LEDs will turn to orange in the first stage. When the first progress bar completes, the LEDs should turn green again before the second stage. If they stay orange, please disconnect/reconnect the firewire cable (and the external power supply if in use) and wait until the LEDs turn green. They will stay green for no more than a few seconds, and then turn orange again for the second stage of the firmware update. Once the second stage progress bar completes, the LEDs will turn green again and stay green. At this point the firmware update should be complete.

War dieser Beitrag hilfreich?
0 von 0 fanden dies hilfreich
Haben Sie Fragen? Anfrage einreichen


Didn't find what you were looking for?

Search again using our search tool.